The Mouse Club

Thursday, 4 September 2025

Re: [emrat:15159] Fwd: RMRAT SOCIAL MEET-UP - THU, 9/4/25, 5:00 PM, AT BANDED OAK BREWING, 470 BROADWAY, DENVER

Sorry I can't join you, I had other plans for tonight.

Enjoy!

Tomas

On Thu, Sep 4, 2025, 4:41 PM 'sfr4201' via RMRAT <rmrat@googlegroups.com> wrote:

Just arrived and spilt my first IPA,ARRGH!!Nailed down a table in the shade and parking is wide open at the moment.........

E-Steve

Sent from my T-Mobile 5G Device

-------- Original message --------
From: 'WAYNE EVERMAN' via RMRAT <rmrat@googlegroups.com>
Date: 9/4/25 1:41 PM (GMT-07:00)
To: rmrat@googlegroups.com
Subject: [emrat:15157] Fwd: RMRAT SOCIAL MEET-UP - THU, 9/4/25, 5:00 PM, AT BANDED OAK BREWING, 470 BROADWAY, DENVER

RMRATS: STILL ON FOR TO-NITE! BE THERE OR BE SQUARE. EWB

---------- Original Message ----------

From: WAYNE EVERMAN <weverman@comcast.net>

To: "rmrat@googlegroups.com" <rmrat@googlegroups.com>

Date: 08/09/2025 6:54 PM MDT

Subject: RMRAT SOCIAL MEET-UP - THU, 9/4/25, 5:00 PM, AT BANDED OAK BREWING, 470 BROADWAY, DENVER

This is the last Bike Nite at Banded Oak, as they are closing at the end of September...

Join me for a jar and to check out my new motor (Ladies; I've gained a few pounds and lost some hair since this photo was taken). EWB

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1751979582.549054.1757014912894%40connect.xfinity.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/2104140740.15993.1757025711981%40yahoo.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CAFXhDvA9sVc_YQO2pQ0sWcAzeXirgZLUvcs6N1UbroAL0V3YTA%40mail.gmail.com.

RE: [emrat:15158] Fwd: RMRAT SOCIAL MEET-UP - THU, 9/4/25, 5:00 PM, AT BANDED OAK BREWING, 470 BROADWAY, DENVER

Just arrived and spilt my first IPA,ARRGH!!Nailed down a table in the shade and parking is wide open at the moment.........

E-Steve

Sent from my T-Mobile 5G Device

-------- Original message --------

From: 'WAYNE EVERMAN' via RMRAT <rmrat@googlegroups.com>

Date: 9/4/25 1:41 PM (GMT-07:00)

To: rmrat@googlegroups.com

Subject: [emrat:15157] Fwd: RMRAT SOCIAL MEET-UP - THU, 9/4/25, 5:00 PM, AT BANDED OAK BREWING, 470 BROADWAY, DENVER

RMRATS: STILL ON FOR TO-NITE! BE THERE OR BE SQUARE. EWB

---------- Original Message ----------

From: WAYNE EVERMAN <weverman@comcast.net>

To: "rmrat@googlegroups.com" <rmrat@googlegroups.com>

Date: 08/09/2025 6:54 PM MDT

Subject: RMRAT SOCIAL MEET-UP - THU, 9/4/25, 5:00 PM, AT BANDED OAK BREWING, 470 BROADWAY, DENVER

This is the last Bike Nite at Banded Oak, as they are closing at the end of September...

Join me for a jar and to check out my new motor (Ladies; I've gained a few pounds and lost some hair since this photo was taken). EWB

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1751979582.549054.1757014912894%40connect.xfinity.com.

[emrat:15157] Fwd: RMRAT SOCIAL MEET-UP - THU, 9/4/25, 5:00 PM, AT BANDED OAK BREWING, 470 BROADWAY, DENVER

RMRATS: STILL ON FOR TO-NITE! BE THERE OR BE SQUARE. EWB

---------- Original Message ----------

From: WAYNE EVERMAN <weverman@comcast.net>

To: "rmrat@googlegroups.com" <rmrat@googlegroups.com>

Date: 08/09/2025 6:54 PM MDT

Subject: RMRAT SOCIAL MEET-UP - THU, 9/4/25, 5:00 PM, AT BANDED OAK BREWING, 470 BROADWAY, DENVER

This is the last Bike Nite at Banded Oak, as they are closing at the end of September...

Join me for a jar and to check out my new motor (Ladies; I've gained a few pounds and lost some hair since this photo was taken). EWB

Tuesday, 2 September 2025

Re: [emrat:15156] Happenings this Week

See you there.

Vince

Sent from my iPhone

On Sep 2, 2025, at 6:04 PM, 'sfr4201' via RMRAT <rmrat@googlegroups.com> wrote:

Firstly,Thurs. 9/4,we will have a RMRAT Social at Banded Oak.This will start at 5 o'clock.Address is 470 Broadway,Denver

Monthly RAT meeting will happen Sat. 9/6 at Foothills Motorcycles at 10 o'clock

Hope to see you on either one of those two days,have a good week

E-Steve

Sent from my T-Mobile 5G Device

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/2012209707.3131597.1756857847521%40yahoo.com.

[emrat:15155] Happenings this Week

Firstly,Thurs. 9/4,we will have a RMRAT Social at Banded Oak.This will start at 5 o'clock.Address is 470 Broadway,Denver

Monthly RAT meeting will happen Sat. 9/6 at Foothills Motorcycles at 10 o'clock

Hope to see you on either one of those two days,have a good week

E-Steve

Sent from my T-Mobile 5G Device

Monday, 1 September 2025

RE: Re[2]: [emrat:15154] Tiger 800 gearbox issues

E-Steve; can't offer any advice on the gearbox, however it sounds like you are functioning enough again to twist wrenches (spanners?). Have you been able to ride yet? I will post a reminder for the Banded Oak Bike Nite on THU 9/4 on both sites. EWB

On 09/01/2025 5:23 PM MDT 'sfr4201' via RMRAT <rmrat@googlegroups.com> wrote:

That is very interesting about the detention wheel and plate Capt.Bob.All the other threads l have seen appear to center around the pin on the shift shaft,a prime point of failure! Mine is perfectly fine,so l will not mess with the deal(drill,8mm tap,etc)!!

Will check the link you sent later and thanks Tavis for your feedback back

E-Steve

Sent from my T-Mobile 5G Device

-------- Original message --------

From: Robert Wendl <radwendl@oneimage.com>

Date: 9/1/25 4:27 PM (GMT-07:00)

To: Rocky Rountain Rat <rmrat@googlegroups.com>

Subject: Re[2]: [emrat:15152] Tiger 800 gearbox issues

E-Steve,

My 2012 Tiger has 99,710 miles and I have had not issue with the clutch and/or transmission.

I did find this tread Proper way to diagnose a gear shift problem - 800 XC | Triumph Rat Motorcycle Forums on Triumphrat.net. On part of the tread I found the replace the Detent Wheel and Pivot Plate which resolved the down shifting issue. I believe this was the case of the issue with Norms Bonneville.

Bob Wendl

------ Original Message ------

From "Brian Weberg" <bw26354@gmail.com>

To rmrat@googlegroups.com

Date 9/1/2025 4:27:37 PM

Subject Re: [emrat:15150] Tiger 800 gearbox issues

Hi E-Steve. I had my 2015 Tiger 800 for ten years and never received a recall on it. And it ran flawlessly for all those years.

Brian W.

On Mon, Sep 1, 2025 at 9:16 AM 'sfr4201' via RMRAT <rmrat@googlegroups.com> wrote:

Good morning to all fellow Tiger 800 owners....

If there are anyone of you out there that has owned an 800 Tiger from years 2011-2017,did you at anytime received a recall notice regarding a shifting issue with the gearbox from Triumph( mostly down shifts)?Mine upshifts fine to 6th gear downshifting from 4th to 2nd turns into a major fight!!!The spring and the pin in the shifter mechanism is not at fault but there appears to be excessive free play at the shift pedal,which does not seem right.l did check a Tiger 800 forum and Triumph RAT.net,but no dice.

I have dis-assembled the clutch 3 times on this and checked on- line and took pictures proir to removal, but have gotten nowhere!

This started last April when the shifter broke at the crank case.Anything that l have over looked?

Currently,the bike is back together and l have no parts left over.A small spring on the shift paw broke back in 2023 and was repla ed.Just looking for feedback before l can devise a game plan for the Winter........

E-Steve

Sent from my T-Mobile 5G Device

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1300573912.2214386.1756739803122%40yahoo.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CAP9EkxVt3sG-t2TXPYAY_Ltqj4CTGwsheo20O29%2BKMs2U-kxgQ%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/emecbac9b8-5cb6-4edc-8b5b-271df04336f8%4088fca795.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/953262692.1904879.1756769021105%40yahoo.com.

RE: Re[2]: [emrat:15153] Tiger 800 gearbox issues

That is very interesting about the detention wheel and plate Capt.Bob.All the other threads l have seen appear to center around the pin on the shift shaft,a prime point of failure! Mine is perfectly fine,so l will not mess with the deal(drill,8mm tap,etc)!!

Will check the link you sent later and thanks Tavis for your feedback back

E-Steve

Sent from my T-Mobile 5G Device

-------- Original message --------

From: Robert Wendl <radwendl@oneimage.com>

Date: 9/1/25 4:27 PM (GMT-07:00)

To: Rocky Rountain Rat <rmrat@googlegroups.com>

Subject: Re[2]: [emrat:15152] Tiger 800 gearbox issues

E-Steve,

My 2012 Tiger has 99,710 miles and I have had not issue with the clutch and/or transmission.

I did find this tread Proper way to diagnose a gear shift problem - 800 XC | Triumph Rat Motorcycle Forums on Triumphrat.net. On part of the tread I found the replace the Detent Wheel and Pivot Plate which resolved the down shifting issue. I believe this was the case of the issue with Norms Bonneville.

Bob Wendl

------ Original Message ------

From "Brian Weberg" <bw26354@gmail.com>

To rmrat@googlegroups.com

Date 9/1/2025 4:27:37 PM

Subject Re: [emrat:15150] Tiger 800 gearbox issues

Hi E-Steve. I had my 2015 Tiger 800 for ten years and never received a recall on it. And it ran flawlessly for all those years.

Brian W.

On Mon, Sep 1, 2025 at 9:16 AM 'sfr4201' via RMRAT <rmrat@googlegroups.com> wrote:
Good morning to all fellow Tiger 800 owners....

If there are anyone of you out there that has owned an 800 Tiger from years 2011-2017,did you at anytime received a recall notice regarding a shifting issue with the gearbox from Triumph( mostly down shifts)?Mine upshifts fine to 6th gear downshifting from 4th to 2nd turns into a major fight!!!The spring and the pin in the shifter mechanism is not at fault but there appears to be excessive free play at the shift pedal,which does not seem right.l did check a Tiger 800 forum and Triumph RAT.net,but no dice.

I have dis-assembled the clutch 3 times on this and checked on- line and took pictures proir to removal, but have gotten nowhere!

This started last April when the shifter broke at the crank case.Anything that l have over looked?

Currently,the bike is back together and l have no parts left over.A small spring on the shift paw broke back in 2023 and was repla ed.Just looking for feedback before l can devise a game plan for the Winter........

E-Steve

Sent from my T-Mobile 5G Device

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1300573912.2214386.1756739803122%40yahoo.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CAP9EkxVt3sG-t2TXPYAY_Ltqj4CTGwsheo20O29%2BKMs2U-kxgQ%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/emecbac9b8-5cb6-4edc-8b5b-271df04336f8%4088fca795.com.

Re[2]: [emrat:15152] Tiger 800 gearbox issues

E-Steve,

My 2012 Tiger has 99,710 miles and I have had not issue with the clutch and/or transmission.

Bob Wendl

------ Original Message ------

From "Brian Weberg" <bw26354@gmail.com>

To rmrat@googlegroups.com

Date 9/1/2025 4:27:37 PM

Subject Re: [emrat:15150] Tiger 800 gearbox issues

Hi E-Steve. I had my 2015 Tiger 800 for ten years and never received a recall on it. And it ran flawlessly for all those years.

Brian W.

On Mon, Sep 1, 2025 at 9:16 AM 'sfr4201' via RMRAT <rmrat@googlegroups.com> wrote:
Good morning to all fellow Tiger 800 owners....

If there are anyone of you out there that has owned an 800 Tiger from years 2011-2017,did you at anytime received a recall notice regarding a shifting issue with the gearbox from Triumph( mostly down shifts)?Mine upshifts fine to 6th gear downshifting from 4th to 2nd turns into a major fight!!!The spring and the pin in the shifter mechanism is not at fault but there appears to be excessive free play at the shift pedal,which does not seem right.l did check a Tiger 800 forum and Triumph RAT.net,but no dice.

I have dis-assembled the clutch 3 times on this and checked on- line and took pictures proir to removal, but have gotten nowhere!

This started last April when the shifter broke at the crank case.Anything that l have over looked?

Currently,the bike is back together and l have no parts left over.A small spring on the shift paw broke back in 2023 and was repla ed.Just looking for feedback before l can devise a game plan for the Winter........

E-Steve

Sent from my T-Mobile 5G Device

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1300573912.2214386.1756739803122%40yahoo.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CAP9EkxVt3sG-t2TXPYAY_Ltqj4CTGwsheo20O29%2BKMs2U-kxgQ%40mail.gmail.com.

Re: [emrat:15151] Tiger 800 gearbox issues

Steve, I have never been gentle with mine and never saw a recall and have not had any issues. Which is also surprising given how many times I dropped it in the mud.

-= Tavis =-

On Mon, Sep 1, 2025 at 3:27 PM Brian Weberg <bw26354@gmail.com> wrote:

Hi E-Steve. I had my 2015 Tiger 800 for ten years and never received a recall on it. And it ran flawlessly for all those years.

Brian W.

On Mon, Sep 1, 2025 at 9:16 AM 'sfr4201' via RMRAT <rmrat@googlegroups.com> wrote:
Good morning to all fellow Tiger 800 owners....

If there are anyone of you out there that has owned an 800 Tiger from years 2011-2017,did you at anytime received a recall notice regarding a shifting issue with the gearbox from Triumph( mostly down shifts)?Mine upshifts fine to 6th gear downshifting from 4th to 2nd turns into a major fight!!!The spring and the pin in the shifter mechanism is not at fault but there appears to be excessive free play at the shift pedal,which does not seem right.l did check a Tiger 800 forum and Triumph RAT.net,but no dice.

I have dis-assembled the clutch 3 times on this and checked on- line and took pictures proir to removal, but have gotten nowhere!

This started last April when the shifter broke at the crank case.Anything that l have over looked?

Currently,the bike is back together and l have no parts left over.A small spring on the shift paw broke back in 2023 and was repla ed.Just looking for feedback before l can devise a game plan for the Winter........

E-Steve

Sent from my T-Mobile 5G Device

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1300573912.2214386.1756739803122%40yahoo.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CAP9EkxVt3sG-t2TXPYAY_Ltqj4CTGwsheo20O29%2BKMs2U-kxgQ%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CAM7G3a9qkC6aX-oGjzA0GQYA_x0daeoo1xN-y-5ex9_cOGZN5g%40mail.gmail.com.

Re: [emrat:15150] Tiger 800 gearbox issues

Hi E-Steve. I had my 2015 Tiger 800 for ten years and never received a recall on it. And it ran flawlessly for all those years.

Brian W.

On Mon, Sep 1, 2025 at 9:16 AM 'sfr4201' via RMRAT <rmrat@googlegroups.com> wrote:

Good morning to all fellow Tiger 800 owners....

If there are anyone of you out there that has owned an 800 Tiger from years 2011-2017,did you at anytime received a recall notice regarding a shifting issue with the gearbox from Triumph( mostly down shifts)?Mine upshifts fine to 6th gear downshifting from 4th to 2nd turns into a major fight!!!The spring and the pin in the shifter mechanism is not at fault but there appears to be excessive free play at the shift pedal,which does not seem right.l did check a Tiger 800 forum and Triumph RAT.net,but no dice.

I have dis-assembled the clutch 3 times on this and checked on- line and took pictures proir to removal, but have gotten nowhere!

This started last April when the shifter broke at the crank case.Anything that l have over looked?

Currently,the bike is back together and l have no parts left over.A small spring on the shift paw broke back in 2023 and was repla ed.Just looking for feedback before l can devise a game plan for the Winter........

E-Steve

Sent from my T-Mobile 5G Device

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1300573912.2214386.1756739803122%40yahoo.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CAP9EkxVt3sG-t2TXPYAY_Ltqj4CTGwsheo20O29%2BKMs2U-kxgQ%40mail.gmail.com.

Re: [emrat:15149] Tiger 800 gearbox issues

Steve: you may remember the last time we were in Sturgis, my Bonnie would not downshift. The cause was wear on the lever that moves the gears. The oe part was soft steel that wears. The replacement part was hardened steel. May be the same issue on your bike.

On Mon, Sep 1, 2025, 9:16 AM 'sfr4201' via RMRAT <rmrat@googlegroups.com> wrote:

Good morning to all fellow Tiger 800 owners....

If there are anyone of you out there that has owned an 800 Tiger from years 2011-2017,did you at anytime received a recall notice regarding a shifting issue with the gearbox from Triumph( mostly down shifts)?Mine upshifts fine to 6th gear downshifting from 4th to 2nd turns into a major fight!!!The spring and the pin in the shifter mechanism is not at fault but there appears to be excessive free play at the shift pedal,which does not seem right.l did check a Tiger 800 forum and Triumph RAT.net,but no dice.

I have dis-assembled the clutch 3 times on this and checked on- line and took pictures proir to removal, but have gotten nowhere!

This started last April when the shifter broke at the crank case.Anything that l have over looked?

Currently,the bike is back together and l have no parts left over.A small spring on the shift paw broke back in 2023 and was repla ed.Just looking for feedback before l can devise a game plan for the Winter........

E-Steve

Sent from my T-Mobile 5G Device

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1300573912.2214386.1756739803122%40yahoo.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CAF3_198nhuCaFd2dq7jo2jzU8n34qgR-hZ%2BYBUdKEOqimtb4-Q%40mail.gmail.com.

[emrat:15148] Tiger 800 gearbox issues

Good morning to all fellow Tiger 800 owners....

If there are anyone of you out there that has owned an 800 Tiger from years 2011-2017,did you at anytime received a recall notice regarding a shifting issue with the gearbox from Triumph( mostly down shifts)?Mine upshifts fine to 6th gear downshifting from 4th to 2nd turns into a major fight!!!The spring and the pin in the shifter mechanism is not at fault but there appears to be excessive free play at the shift pedal,which does not seem right.l did check a Tiger 800 forum and Triumph RAT.net,but no dice.

I have dis-assembled the clutch 3 times on this and checked on- line and took pictures proir to removal, but have gotten nowhere!

This started last April when the shifter broke at the crank case.Anything that l have over looked?

Currently,the bike is back together and l have no parts left over.A small spring on the shift paw broke back in 2023 and was repla ed.Just looking for feedback before l can devise a game plan for the Winter........

E-Steve

Sent from my T-Mobile 5G Device

Tuesday, 26 August 2025

Re: [emrat:15147] Fall Overnighter Sept.20th

Booked at Quality Inn.

Yahoo Mail: Search, Organize, Conquer

On Tue, Aug 26, 2025 at 6:17 PM, 'sfr4201' via RMRAT
<rmrat@googlegroups.com> wrote:

Afternoon everyone

I hope the following e-mail will alleviate confusion from proir correspondence regarding the Fall overnight ride to McCook.The following is the logistics in it's final form:

Sept.20th

Meet at QT 1190 S.1st Street,Bennett 80102
We will be departing at 9am SHARP....

Lodging:

Quality lnn
901 US 83
McCook NE.69001

Phone:308-737-2021

I HAVE NOT inquired about a discounted rate for a big party group with the motel

Be stopping for lunch in Wray
Dinner will be at the Copper Mill (time TBD)which is across the street from the motel

One last thing,Nebraska is in the Central time zone so do not forget to add 1 hour......

If l have overlooked anything,let me know.l will provide copies of the route.Thanks for listening.......

E-Steve

Sent from my T-Mobile 5G Device

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1651412013.1192467.1756253823047%40yahoo.com.

[emrat:15146] Fall Overnighter Sept.20th

Afternoon everyone

I hope the following e-mail will alleviate confusion from proir correspondence regarding the Fall overnight ride to McCook.The following is the logistics in it's final form:

Sept.20th

Meet at QT 1190 S.1st Street,Bennett 80102

We will be departing at 9am SHARP....

Lodging:

Quality lnn

901 US 83

McCook NE.69001

Phone:308-737-2021

I HAVE NOT inquired about a discounted rate for a big party group with the motel

Be stopping for lunch in Wray

Dinner will be at the Copper Mill (time TBD)which is across the street from the motel

One last thing,Nebraska is in the Central time zone so do not forget to add 1 hour......

If l have overlooked anything,let me know.l will provide copies of the route.Thanks for listening.......

E-Steve

Sent from my T-Mobile 5G Device

RE: [emrat:15145] Moderator's spam report for rmrat@googlegroups.com

Chris

The correct address for the Quality lnn in McCook is the 901 US 83 address.lnfo l had on the trip planner and on line created confusion and yes,it took me some time to figure out!!!

E-Steve

Sent from my T-Mobile 5G Device

-------- Original message --------

From: noreply-spamdigest via RMRAT <rmrat@googlegroups.com>

Date: 8/26/25 4:38 PM (GMT-07:00)

To: Spam moderators <rmrat+managers@googlegroups.com>

Subject: [emrat:15145] Moderator's spam report for rmrat@googlegroups.com

This message is being sent to you because you are a moderator of the group rmrat.

The following suspicious messages were sent to your group, but are being held in your moderation queue because they are classified as likely spam messages.

If you take no action, all the messages below will be discarded automatically as spam.

However, if you see any messages that are not spam below, you may approve them individually by going to:

https://groups.google.com/group/rmrat/pendmsg

Please do not mark this notification as spam; this is a service for group moderators. If you do not wish to receive these notifications in the future, you may change your preferences by going to:

https://groups.google.com/group/rmrat/manage_post

------- 1 of 4 -------
Subject: Re: [emrat:15143] Fw: McCook
From: peltz.chris <peltz.chris@gmail.com>
Date: Aug 22 06:29PM -0600

Steve - the only Quality Inn I found in McCook had a different address -

901 US-83, McCook, NE 69001

Can you confirm location ?

Approve: https://groups.google.com/group/rmrat/pendmsg?view=full&pending_id=3652684192056856027

------- 2 of 4 -------
Subject: Re: [emrat:15144] Fw: McCook
From: peltz.chris <peltz.chris@gmail.com>
Date: Aug 22 08:29PM -0600

Thanks Steve for confirming. Booked.

Approve: https://groups.google.com/group/rmrat/pendmsg?view=full&pending_id=8059451987100159181

------- 3 of 4 -------
Subject: Re: [emrat:15144] McCook
From: Vince M Lane <blcswvjd@msn.com>
Date: Aug 25 03:27AM

E-Steve,
Is there a group RMRAT rate That we should mention for the Quality Inn in McCook?
Thanks,
Vince

On Aug 22, 2025, at 8:15 PM, 'sfr4201' via RMRAT <rmrat@googlegroups.com> wrote:

ATTENTION EVERYONE

I just discovered that l

Approve: https://groups.google.com/group/rmrat/pendmsg?view=full&pending_id=350745195575542800

------- 4 of 4 -------
Subject: Re: [emrat:15142] Re: Bullet Bob's Five Pass Ride - Aug 17 Update
From: Curtis Graves <ikonoklass@gmail.com>
Date: Aug 25 12:31AM -0400

Sorry to have missed the ride; I'm back East Riding. Rented a Tiger 900.
Great bike!

On Sun, Aug 17, 2025 at 10:03 PM warfman2 via RMRAT <rmrat@googlegroups.com>
wrote:

Approve: https://groups.google.com/group/rmrat/pendmsg?view=full&pending_id=8164146171042954957

For more information about this message, please visit:
https://support.google.com/groups/answer/2466386

Friday, 22 August 2025

RE: [emrat:15144] Fw: McCook

ATTENTION EVERYONE

I just discovered that l posted an incorrect address for the Quality lnn in McCook!The PROPER address should read:

901 N.US 83

McCook NE 69001

308-345-7115

The Coppermill is still across the street.Appologies for the confusion

E-Steve

Sent from my T-Mobile 5G Device

-------- Original message --------

From: 'sfr4201' via RMRAT <rmrat@googlegroups.com>

Date: 8/22/25 5:59 PM (GMT-07:00)

To: Sfr4201' via RMRAT <rmrat@googlegroups.com>

Subject: [emrat:15143] Fw: McCook

Good Afternoon

For those of you that are interested in participating in the Fall overnight ride to McCook on Sept.20th,l have forwarded Capt.Bob"s e-mail that has the complete route details for you to download (3 pages)which l will follow.The one and only change will be the meeting/departure point for Saturday which is as follows:QT 1190 S.1st Street,Bennett 80102,tanks filled,bladder drained and stands up at 9am with an ETA in McCook at around 2.45.l will also bring with me printed copies of the route as well.

We will stop for lunch in Wray.

The address for the Quality lnn in McCook is:

1762 W J Street

McCook NE 69001

308-737-2021

Dinner destination is directly across the street from the motel.ln closing,a question fot Capt.Bob which is,the name of the restaurant and do we need to make a reservation?Thanks in advance

Have a great weekend......

E-Steve

----- Forwarded Message -----

From: Robert Wendl <radwendl@oneimage.com>

To: Steve Farrow-Reid <sfr4201@yahoo.com>

Sent: Tuesday, July 22, 2025 at 05:35:22 PM MDT

Subject: McCook

Steve,

Attached you will find all the documents I have on the Overnight ride to McCook.

Let me know if you need anything else.

Bob Wendl

[emrat:15143] Fw: McCook

Good Afternoon

We will stop for lunch in Wray.

The address for the Quality lnn in McCook is:

1762 W J Street

McCook NE 69001

308-737-2021

Dinner destination is directly across the street from the motel.ln closing,a question fot Capt.Bob which is,the name of the restaurant and do we need to make a reservation?Thanks in advance

Have a great weekend......

E-Steve

----- Forwarded Message -----

From: Robert Wendl <radwendl@oneimage.com>

To: Steve Farrow-Reid <sfr4201@yahoo.com>

Sent: Tuesday, July 22, 2025 at 05:35:22 PM MDT

Subject: McCook

Steve,

Attached you will find all the documents I have on the Overnight ride to McCook.

Let me know if you need anything else.

Bob Wendl

Sunday, 17 August 2025

Re: [emrat:15142] Re: Bullet Bob’s Five Pass Ride - Aug 17 Update

Hi BB!

This reply is "perhaps" a bit late.

However, did the Pagans have any idea that the RMRATs of Colorado were visiting Oak Creek at the same time? Could have been a good time for a Rumble, or some détente! Anyhow, I hope the ride was a success for all!

-WarpDrive

On 08/15/2025 1:36 PM MDT 'Bullet Bob' via RMRAT <rmrat@googlegroups.com> wrote:

RATs,

Expect you all know that the Pagans are converging on Oak Creek this weekend and there is the new Crosho fire west of Yampa. Given these events, that will likely impact traffic on 131 and maybe Gore, my Five Pass route will avoid these roads this year.. Still noodling the final route, but wanted to let you know these issues were known so you wouldn't bail because of.

BBob

On Saturday, August 9, 2025 at 8:20:57 AM UTC-6 Bullet Bob wrote:

RATs,

This to confirm I will be leading my (more or less) annual Five Pass ride on Sunday Aug 17th. Meetup/breakfast to be at Launch Espresso (18455 W Colfax) at 8:00 a.m., with stands up at 9:00. As always, come gassed up and should be a full day!

B Bob

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1f651687-5f6f-4c9d-b46b-93f193262eb7n%40googlegroups.com.

Saturday, 16 August 2025

RE: [emrat:15141] Re: Bullet Bob’s Five Pass Ride - Aug 17 Update

Bullet Bob

Just a heads up that as much as l would like to join you,my right hand needs two more weeks to fully recover,so that is a no go from me......

Be safe out there and have fun!

E-Steve

Sent from my T-Mobile 5G Device

-------- Original message --------

From: Albert Miller <amiller1104@gmail.com>

Date: 8/16/25 3:30 PM (GMT-07:00)

To: RMRAT <rmrat@googlegroups.com>

Subject: [emrat:15141] Re: Bullet Bob's Five Pass Ride - Aug 17 Update

Understood and I should see you on Sunday.

Al M

On Friday, August 15, 2025 at 1:36:17 PM UTC-6 Bullet Bob wrote:

RATs,

Expect you all know that the Pagans are converging on Oak Creek this weekend and there is the new Crosho fire west of Yampa. Given these events, that will likely impact traffic on 131 and maybe Gore, my Five Pass route will avoid these roads this year.. Still noodling the final route, but wanted to let you know these issues were known so you wouldn't bail because of.

BBob

On Saturday, August 9, 2025 at 8:20:57 AM UTC-6 Bullet Bob wrote:
RATs,

This to confirm I will be leading my (more or less) annual Five Pass ride on Sunday Aug 17th. Meetup/breakfast to be at Launch Espresso (18455 W Colfax) at 8:00 a.m., with stands up at 9:00. As always, come gassed up and should be a full day!

B Bob

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/73d45a27-ccc0-407c-b22f-f54e859c3ce6n%40googlegroups.com.

[emrat:15141] Re: Bullet Bob’s Five Pass Ride - Aug 17 Update

Understood and I should see you on Sunday.

Al M

On Friday, August 15, 2025 at 1:36:17 PM UTC-6 Bullet Bob wrote:

RATs,

Expect you all know that the Pagans are converging on Oak Creek this weekend and there is the new Crosho fire west of Yampa. Given these events, that will likely impact traffic on 131 and maybe Gore, my Five Pass route will avoid these roads this year.. Still noodling the final route, but wanted to let you know these issues were known so you wouldn't bail because of.

BBob

On Saturday, August 9, 2025 at 8:20:57 AM UTC-6 Bullet Bob wrote:
RATs,

This to confirm I will be leading my (more or less) annual Five Pass ride on Sunday Aug 17th. Meetup/breakfast to be at Launch Espresso (18455 W Colfax) at 8:00 a.m., with stands up at 9:00. As always, come gassed up and should be a full day!

B Bob

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/73d45a27-ccc0-407c-b22f-f54e859c3ce6n%40googlegroups.com.

Friday, 15 August 2025

[emrat:15140] Re: Bullet Bob’s Five Pass Ride - Aug 17 Update

RATs,

Expect you all know that the Pagans are converging on Oak Creek this weekend and there is the new Crosho fire west of Yampa. Given these events, that will likely impact traffic on 131 and maybe Gore, my Five Pass route will avoid these roads this year.. Still noodling the final route, but wanted to let you know these issues were known so you wouldn't bail because of.

BBob

On Saturday, August 9, 2025 at 8:20:57 AM UTC-6 Bullet Bob wrote:

RATs,

This to confirm I will be leading my (more or less) annual Five Pass ride on Sunday Aug 17th. Meetup/breakfast to be at Launch Espresso (18455 W Colfax) at 8:00 a.m., with stands up at 9:00. As always, come gassed up and should be a full day!

B Bob

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1f651687-5f6f-4c9d-b46b-93f193262eb7n%40googlegroups.com.

Saturday, 9 August 2025

Re: [emrat:15138] RMRAT SOCIAL MEET-UP - THU, 9/4/25, 5:00 PM, AT BANDED OAK BREWING, 470 BROADWAY, DENVER

Don't feel too bad about that Wayne, I'm guessing that he has too

Steve

On Sat, Aug 9, 2025 at 18:54 'WAYNE EVERMAN' via RMRAT <rmrat@googlegroups.com> wrote:

This is the last Bike Nite at Banded Oak, as they are closing at the end of September...

Join me for a jar and to check out my new motor (Ladies; I've gained a few pounds and lost some hair since this photo was taken). EWB

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/9147216.444243.1754787268404%40connect.xfinity.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CALG-%3D_WugTvSpskHpnhoCE5%2B105asZpjW7F7eYiwkox9Q4NPOw%40mail.gmail.com.

[emrat:15137] RMRAT SOCIAL MEET-UP - THU, 9/4/25, 5:00 PM, AT BANDED OAK BREWING, 470 BROADWAY, DENVER

This is the last Bike Nite at Banded Oak, as they are closing at the end of September...

Join me for a jar and to check out my new motor (Ladies; I've gained a few pounds and lost some hair since this photo was taken). EWB

[emrat:15136] Bullet Bob’s Five Pass Ride - Aug 17

RATs,

This to confirm I will be leading my (more or less) annual Five Pass ride on Sunday Aug 17th. Meetup/breakfast to be at Launch Espresso (18455 W Colfax) at 8:00 a.m., with stands up at 9:00. As always, come gassed up and should be a full day!

B Bob

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/FB5E27E9-BE31-4E9E-BD15-5C0A83589886%40comcast.net.

Saturday, 2 August 2025

Re: [emrat:15135] Monthly Meeting

Check with Doc, I thought the last one will be in Sept

On Sat, Aug 2, 2025 at 6:16 PM 'WAYNE EVERMAN' via RMRAT <rmrat@googlegroups.com> wrote:

E-Steve; sorry I missed the meeting today. I understand that you all discussed a final RMRAT social meetup at Banded Oak as they are closing at the end of AUG. Let me know of any responses as far at date/time goes, and I will post an invite on this site and FB. I have a good graphic that will pull in the ladies! EWB

On 07/29/2025 1:57 PM MDT 'sfr4201' via RMRAT <rmrat@googlegroups.com> wrote:

Afternoon everyone

Saturday August 2nd is meeting time at Foothills Motorcycles at 10 o'clock.Look forward to seeing you all,ride safe......

E-Steve

Sent from my T-Mobile 5G Device

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1127939733.426938.1753819053710%40yahoo.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1321891316.330213.1754180200749%40connect.xfinity.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CAF3_199o5oa_bgNetUs_dWCNVJSwKQL4jdZ_8oAGJf9poAaNyg%40mail.gmail.com.

Re: [emrat:15134] Monthly Meeting

E-Steve; sorry I missed the meeting today. I understand that you all discussed a final RMRAT social meetup at Banded Oak as they are closing at the end of AUG. Let me know of any responses as far at date/time goes, and I will post an invite on this site and FB. I have a good graphic that will pull in the ladies! EWB

On 07/29/2025 1:57 PM MDT 'sfr4201' via RMRAT <rmrat@googlegroups.com> wrote:

Afternoon everyone

Saturday August 2nd is meeting time at Foothills Motorcycles at 10 o'clock.Look forward to seeing you all,ride safe......

E-Steve

Sent from my T-Mobile 5G Device

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/1127939733.426938.1753819053710%40yahoo.com.

Tuesday, 29 July 2025

[emrat:15133] Monthly Meeting

Afternoon everyone

Saturday August 2nd is meeting time at Foothills Motorcycles at 10 o'clock.Look forward to seeing you all,ride safe......

E-Steve

Sent from my T-Mobile 5G Device

Wednesday, 23 July 2025

[emrat:15132] RAT Aparel

First part of this message mostly concerns Charlie Richards and "Bullit" Bob.Stopped by Bull Frog and the design for the 2025 Steamboat Rally is still on file.So,if you would still like a shirt,please let me know ASAP regarding style ( short sleeve/ long sleeve) and your shirt size so l can get the order sub-mitted.

Everyone else,l did ask about getting some RMRAT ball caps made up for the group,which Bull Frog can also undertake.lf anyone of you are interested,let me know.Price is dependant on the size of the order.Will follow-up on this on the Aug.2nd meeting.Will see you all at that time,cheers....

E-Steve

Sent from my T-Mobile 5G Device

Monday, 21 July 2025

[emrat:15131] Rally 2025

Good evening

Thankyou all who expressed gratitude and thanks in person or through e-mail regarding the Steamboat rally.Have possible ideas for 2026,but that is another story!

Whilst l remember,there are a couple of upcoming dates l need to disclose:

August 17th: Bullit Bob's 5 pass ride

Route currently in the works,but l know for sure this will be an all day ride.l am aware that the BMW 100,000 foot ride is the day before ( 16th),which some of you may have already signed up.....

September 20th: Fall overnight to McCook,Nebraska.Capt.Bob just e- mailed me the road maps which l will get printed out.l will post all the relevant info by mid-August.Yes,the Wendl's will be meeting us for dinner.

I decided to post these two events now to allow you the opportunity to schedule these around your "domestic obligations".More info will post in due course.Stay cool and have a good week......

E-Steve

Sent from my T-Mobile 5G Device

Re[4]: [emrat:15130] Home

E-Steve,

Yes we need. Below you will find my Garmin MapShare if you want to see our complete route.

Garmin MapShare
https://share.garmin.com/5HWCV

Bob Wendl

------ Original Message ------

From "'sfr4201' via RMRAT" <rmrat@googlegroups.com>

To "Robert Wendl" <robert.leo.wendl@gmail.com>; rmrat@googlegroups.com

Date 7/21/2025 7:48:46 PM

Subject Re: Re[2]: [emrat:15128] Home

Capt.Bob

I assume you stayed on 14 via Ault,Raymer then onto Stirling?Ridden that road once.Very light traffic on this road,but cross winds would be an issue!

Good seeing Denise and yourself,see you in McCook in September

E-Steve

Sent from my T-Mobile 5G Device

-------- Original message --------
From: Robert Wendl <robert.leo.wendl@gmail.com>
Date: 7/21/25 4:50 PM (GMT-07:00)
To: rmrat@googlegroups.com
Subject: Re: Re[2]: [emrat:15127] Home

Steve,

Yes, when we stopped in Walden I looked at the map and noticed that HWY 14 would take us to Holyoke. Then HWY 23 to Holdrege. We have never ridden 23 and it's really good. There are really corners.

Bob W

On Mon, Jul 21, 2025, 5:01 PM Steve Smith <shmitty74@gmail.com> wrote:
That was quite an unexpected route you took home. I guess that you've already ridden most of the other roads in Nebraska. Glad you made it home safely.

Steve

On Mon, Jul 21, 2025 at 15:55 Robert Wendl <radwendl@oneimage.com> wrote:
All,

Denise and I made it home at 4:00pm this afternoon.

Bob Wendl

------ Original Message ------

From "Tavis Aitken" <tavisto@gmail.com>

To rmrat@googlegroups.com

Date 7/20/2025 8:30:19 PM

Subject Re: [emrat:15123] Home

I got home around 2:30, had a nice ride back despite a little bit of traffic. It was really great to hang out and chat with everyone!

A huge shout out to E-Steve for corralling us all and shuttling the coolers!

- Tavis

On Sun, Jul 20, 2025 at 6:28 PM Steve Smith <shmitty74@gmail.com> wrote:
Annette and I arrived in Montrose after a leisurely ride home that included lunch in Meeker and a refreshingly cool ride across the Grand Mesa. We had a fantastic time drinking to excess and BSing with everyone in Steamboat. We were so happy to be there with our dear friends from RMRAT.

I will add our voices to those giving props to E-Steve for setting up a great event. You did a bang up job on your first year of leadership. Huzzah!

Steve

On Sun, Jul 20, 2025 at 18:12 Robert Wendl <robert.leo.wendl@gmail.com> wrote:
All,

Denise and I took a different route then planned and we're in Holyoke CO.

We want to thank E-Steve for planning a awesome weekend. We enjoyed seeing everyone and can't wait for the Fall Overnight ride.

Bob Wendl

On Sun, Jul 20, 2025, 4:10 PM <adam@vexingworkshop.com> wrote:
I second everything Bob said. Gorgeous morning, great ride. It was great to see everyone again.
--
Remember, I'm pulling for you. We're all in this together.

- Red Green

Jul 20, 2025, 12:05 by bob.sheehan2@gmail.com:

> Adam and I left Steamboat Springs just before 06:00, with the idea of getting to the RMNP before timed entry began at 09:00. We were early, arriving at the park at 07:40.
>
> The ride was a bit chilly. Adam's thermometer recorded a low of 36.
>
> While on Rabbit Ears Pass, a truck a couple of hundred feet ahead of us ran into a deer. Truck: 1, deer: 0.
>
> Although the ride through the park was good, many people were up and about. Traffic must be bad later in the day.
>
> The cafe at the top of Trail Ridge didn't open until 09:00, so we had a surprisingly good breakfast in Estes Park.
>
> As always, it was great to see everyone.
>
> Bob Sheehan
>
>
>
> --
> You received this message because you are subscribed to the Google Groups "RMRAT" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to > rmrat+unsubscribe@googlegroups.com> .
> To view this discussion visit > https://groups.google.com/d/msgid/rmrat/CAHb37jdFotwkrcQzmxLJzzF1REZqRTTvxci5ZPJ2FLYtXmYnNA%40mail.gmail.com <https://groups.google.com/d/msgid/rmrat/CAHb37jdFotwkrcQzmxLJzzF1REZqRTTvxci5ZPJ2FLYtXmYnNA%40mail.gmail.com?utm_medium=email&utm_source=footer>> .
>

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/OVdsqg_--F-9%40vexingworkshop.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CAEuBoLomiR9xUQjf-V7JwgBULrGPQmfBwn3HE7BFHZ5JhtcW2w%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CALG-%3D_XQGuQFDBEeByGuGag4mw2vWLRR-wKC2L0EHt-Y%2BFuGjQ%40mail.gmail.com.

--

-= Tavis =-

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CAM7G3a9%3DDHDOSfD1p%2B2kE42kKSgwoaC4dNTz4fNZF3ctifxHiA%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/emb280d665-5742-404a-932d-8c71da9997fc%40ae962403.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CALG-%3D_WoS%3DrZd5ko%2B%3D4VxiW01Uq1%3DaJRwWr15rmvvh-p1h%2BmhA%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups "RMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rmrat+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/rmrat/CAEuBoLqX_opLShPMRL3SKztycDF4QRta9g_b0oux6v3qdJ%2Bx%2BA%40mail.gmail.com.