Wednesday, 7 November 2018
Tuesday, 6 November 2018
[emrat:11035] Triumph lauch party
Roll out for the new Scrambler is Weds.11/7 in Golden.Due to a work conflict,l can not attend.
So,if you want to go,and are NOT pre-registered,,and think you can pose as an Upper Crust Engilish fellow,like myself,you could score a bag of free swag!Let me know by Weds. am,so l can do what l can from this end to get this set up.
Have a good meeting tonight,remember to watch out for the "step!"
E-Steve
Sent from my T-Mobile 4G LTE Device
Monday, 5 November 2018
Re: [emrat:11034] Re: Bonnie cast wheel project: DONE!
Martin; I think that front rim looks beautiful as is. Maybe an argent silver instead of black highlights on the rear? EWB
Read More :- "Re: [emrat:11034] Re: Bonnie cast wheel project: DONE!"
On November 5, 2018 at 3:30 PM Martin Richard <martinarmy1961@gmail.com> wrote:
Haven't decided yet whether I'm going to paint them. I'm going to see how I like the look with them in the current state. They do look a little bit mismatched with the front wheel being all satin and the rear having black paint on the inner rim and inside of the spokes, but I think it looks OK now. If I do paint them I'd probably go with gloss black.
--On Mon, Nov 5, 2018 at 12:10 PM Jim Baker < beaker@pobox.com> wrote:
Nice job. Are you going to paint the rims?
--On Mon, Nov 5, 2018 at 10:19 AM Martin Richard < martinarmy1961@gmail.com> wrote:
For those who are interested, the total cost was under $400 not counting the tires (which I needed anyway.) Both wheels were found on EBay and the only other thing I had to buy was a set of 4 low profile panhead bolts to replace the big hex bolts that hold the fender in. I did that because I was putting a 10mm wider tire on the 18" wheel (a 110/90/18 in place of the stock 100/90/19) and I wasn't sure if the tire would clear the bolt heads. As it turns out, I think they would have cleared but I like the lower profile bolts anyway and I think my cost for them was about $4.00 at Ace Hardware.
--On Mon, Nov 5, 2018 at 8:38 AM Martin Richard < martinarmy1961@gmail.com> wrote:
You received this message because you are subscribed to the Google Groups "EMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to emrat+unsubscribe@googlegroups.com.
To post to this group, send email to emrat@googlegroups.com.
Visit this group at https://groups.google.com/group/emrat.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "EMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to emrat+unsubscribe@googlegroups.com.
To post to this group, send email to emrat@googlegroups.com.
Visit this group at https://groups.google.com/group/emrat.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "EMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to emrat+unsubscribe@googlegroups.com.
To post to this group, send email to emrat@googlegroups.com.
Visit this group at https://groups.google.com/group/emrat.
For more options, visit https://groups.google.com/d/optout.
Re: [emrat:11033] Re: Bonnie cast wheel project: DONE!
Haven't decided yet whether I'm going to paint them. I'm going to see how I like the look with them in the current state. They do look a little bit mismatched with the front wheel being all satin and the rear having black paint on the inner rim and inside of the spokes, but I think it looks OK now. If I do paint them I'd probably go with gloss black.
On Mon, Nov 5, 2018 at 12:10 PM Jim Baker <beaker@pobox.com> wrote:
Nice job. Are you going to paint the rims?--On Mon, Nov 5, 2018 at 10:19 AM Martin Richard <martinarmy1961@gmail.com> wrote:For those who are interested, the total cost was under $400 not counting the tires (which I needed anyway.) Both wheels were found on EBay and the only other thing I had to buy was a set of 4 low profile panhead bolts to replace the big hex bolts that hold the fender in. I did that because I was putting a 10mm wider tire on the 18" wheel (a 110/90/18 in place of the stock 100/90/19) and I wasn't sure if the tire would clear the bolt heads. As it turns out, I think they would have cleared but I like the lower profile bolts anyway and I think my cost for them was about $4.00 at Ace Hardware.--On Mon, Nov 5, 2018 at 8:38 AM Martin Richard <martinarmy1961@gmail.com> wrote:
You received this message because you are subscribed to the Google Groups "EMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to emrat+unsubscribe@googlegroups.com.
To post to this group, send email to emrat@googlegroups.com.
Visit this group at https://groups.google.com/group/emrat.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "EMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to emrat+unsubscribe@googlegroups.com.
To post to this group, send email to emrat@googlegroups.com.
Visit this group at https://groups.google.com/group/emrat.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "EMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to emrat+unsubscribe@googlegroups.com.
To post to this group, send email to emrat@googlegroups.com.
Visit this group at https://groups.google.com/group/emrat.
For more options, visit https://groups.google.com/d/optout.
Re: [emrat:11032] Re: Bonnie cast wheel project: DONE!
Wow that really looks great. I like the retro look of spoke wheels but your bike looks super with those wheels.
From: emrat@googlegroups.com <emrat@googlegroups.com> on behalf of Martin Richard <martinarmy1961@gmail.com>
Sent: Monday, November 5, 2018 10:19 AM
To: emrat@googlegroups.com
Subject: [emrat:11030] Re: Bonnie cast wheel project: DONE!
Sent: Monday, November 5, 2018 10:19 AM
To: emrat@googlegroups.com
Subject: [emrat:11030] Re: Bonnie cast wheel project: DONE!
For those who are interested, the total cost was under $400 not counting the tires (which I needed anyway.) Both wheels were found on EBay and the only other thing I had to buy was a set of 4 low profile panhead bolts to replace the big hex bolts that hold the fender in. I did that because I was putting a 10mm wider tire on the 18" wheel (a 110/90/18 in place of the stock 100/90/19) and I wasn't sure if the tire would clear the bolt heads. As it turns out, I think they would have cleared but I like the lower profile bolts anyway and I think my cost for them was about $4.00 at Ace Hardware.
On Mon, Nov 5, 2018 at 8:38 AM Martin Richard <martinarmy1961@gmail.com> wrote:
You received this message because you are subscribed to the Google Groups "EMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to emrat+unsubscribe@googlegroups.com.
To post to this group, send email to emrat@googlegroups.com.
Visit this group at https://groups.google.com/group/emrat.
For more options, visit https://groups.google.com/d/optout.
Re: [emrat:11031] Re: Bonnie cast wheel project: DONE!
Nice job. Are you going to paint the rims?
On Mon, Nov 5, 2018 at 10:19 AM Martin Richard <martinarmy1961@gmail.com> wrote:
For those who are interested, the total cost was under $400 not counting the tires (which I needed anyway.) Both wheels were found on EBay and the only other thing I had to buy was a set of 4 low profile panhead bolts to replace the big hex bolts that hold the fender in. I did that because I was putting a 10mm wider tire on the 18" wheel (a 110/90/18 in place of the stock 100/90/19) and I wasn't sure if the tire would clear the bolt heads. As it turns out, I think they would have cleared but I like the lower profile bolts anyway and I think my cost for them was about $4.00 at Ace Hardware.--On Mon, Nov 5, 2018 at 8:38 AM Martin Richard <martinarmy1961@gmail.com> wrote:
You received this message because you are subscribed to the Google Groups "EMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to emrat+unsubscribe@googlegroups.com.
To post to this group, send email to emrat@googlegroups.com.
Visit this group at https://groups.google.com/group/emrat.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "EMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to emrat+unsubscribe@googlegroups.com.
To post to this group, send email to emrat@googlegroups.com.
Visit this group at https://groups.google.com/group/emrat.
For more options, visit https://groups.google.com/d/optout.
[emrat:11030] Re: Bonnie cast wheel project: DONE!
For those who are interested, the total cost was under $400 not counting the tires (which I needed anyway.) Both wheels were found on EBay and the only other thing I had to buy was a set of 4 low profile panhead bolts to replace the big hex bolts that hold the fender in. I did that because I was putting a 10mm wider tire on the 18" wheel (a 110/90/18 in place of the stock 100/90/19) and I wasn't sure if the tire would clear the bolt heads. As it turns out, I think they would have cleared but I like the lower profile bolts anyway and I think my cost for them was about $4.00 at Ace Hardware.
On Mon, Nov 5, 2018 at 8:38 AM Martin Richard <martinarmy1961@gmail.com> wrote:
You received this message because you are subscribed to the Google Groups "EMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to emrat+unsubscribe@googlegroups.com.
To post to this group, send email to emrat@googlegroups.com.
Visit this group at https://groups.google.com/group/emrat.
For more options, visit https://groups.google.com/d/optout.
Subscribe to:
Posts (Atom)















