RE: [emrat:4218] Bike won't start after washing

I'll confess to accidentally hitting the kill switch at different times and then wondering why the bike will not start!

One precaution that I take prior to washing a bike is to put black electrical tape over the ignition keyhole, just to make sure that no water gets into the ignition switch. I think I learned that trick from Peter Sharp . . .

Dan

-----Original Message-----
From: emrat@googlegroups.com [mailto:emrat@googlegroups.com] On Behalf Of Jjtmcd@cs.com
Sent: Monday, March 10, 2014 11:23 AM
To: emrat@googlegroups.com
Subject: Re: [emrat:4217] Bike won't start after washing

Check kill switch?

John J. McDonough, FMP
3to5 Facilitator
the Crankset Group
"get off the treadmill "
303-668-1331
www.cranksetgroup.com

</HTML>

--
You received this message because you are subscribed to the Google Groups "EMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to emrat+unsubscribe@googlegroups.com.
To post to this group, send email to emrat@googlegroups.com.
Visit this group at http://groups.google.com/group/emrat.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "EMRAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to emrat+unsubscribe@googlegroups.com.
To post to this group, send email to emrat@googlegroups.com.
Visit this group at http://groups.google.com/group/emrat.
For more options, visit https://groups.google.com/d/optout.